Beads Out level guide
Beads Out Level 313 Walkthrough
Level 313 stacks three loop lobes into an hourglass chain above a horizontal chevron conveyor. Route red, orange, green, and blue through the lower crossover, then remove the conveyor's leading gray/white, red, pink, and cyan boxes so their replacements slide left before the upper purple and brown bands arrive.
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Beads Out Level 313 — Full Solution
- Tap red, center orange, left-column green, and lower-left blue across slots 1-4.
- Replace departing red with exposed pink; when orange leaves, use lower-row cyan rather than upper-lobe purple.
- As green and blue leave at the first crossover, put olive and right-column gray into their vacancies.
- Select the leading gray/white conveyor box; red, pink, and cyan slide left along the chevron lane.
- Use the newly leading red box on the middle-lobe red strip, then repeat with pink and cyan as the lane advances.
- After the second crossover opens, tap left-column purple and right-column brown; both now fill immediately.
- Reuse their freed slots for the remaining upper-lobe green and gray bands.
- Finish the last orange, red, and pink conveyor replacements, waiting for each departure.
Colors in this level:
Red, Orange, Green, Blue, Pink, Cyan, Olive, Gray, White, Purple, Brown
Common Mistakes to Avoid
- Parking purple and brown before the lower lobe is clear.
- Using every slot while the horizontal conveyor is still advancing replacement boxes.
Quick Tips for Beads Out Level 313 (quick clues)
- Clear the bottom lobe before reserving two slots for upper-lobe colors.
- Remove only the leading gray/white conveyor box, then wait for red, pink, and cyan to slide left before tapping again.
- Delay left-column purple and right-column brown until the second crossover opens and both boxes can fill immediately.
Board notes 5 details
- Layout
- Three vertically stacked lobes form an hourglass chain. Red, orange, green, and blue form the first active set. A horizontal bottom chevron conveyor holds gray/white, red, pink, and cyan boxes.
- Goal
- Unwind the lobes bottom-up while removing the conveyor's leading box so the remaining replacements slide left; no box rises through a vertical elevator.
- Opening
- Continue red, add orange and green, then activate blue for the first crossover and pink for the lower lobe.
- Danger Zone
- Purple and brown are visible but belong to upper-lobe bands. Selecting both during the red-orange-green opening leaves too little space for changing lower-lobe colors.
- Mechanics
- Three lobes share two crossovers, and a horizontal chevron conveyor advances its replacement boxes after the leading box is selected.
Frequently Asked Questions
Which part of Level 313 should I clear first?
Clear the bottom lobe and its first crossover before committing receivers for the middle and upper loops.
Does Level 313 use an elevator?
No vertical elevator action appears in the video. The bottom mechanism is a horizontal chevron conveyor whose boxes slide left after its leading box is removed.