Brain Puzzle: Tricky Quest level guide
Brain Puzzle: Tricky Quest Level 123 Walkthrough
Assemble the suspension bridge in blueprint order — foundations, pillars, arch beam, deck, finishes — then pass inspection so the engineer can cross.
Open on YouTube
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Brain Puzzle: Tricky Quest Level 123 — Full Solution
- Drill foundation holes into both cliff tops.
- Place a Pillar into each foundation hole.
- Span the Arch Beam between the two pillars.
- Cap both pillars with the Pier blocks.
- Lay the Bridge Formwork along the arch as the wooden deck.
- Pour Cement over the formwork so the deck turns to stone.
- Fit the Stairs under the deck.
- Brush on the Waterproof Coating.
- Post the No Entry signs on both cliffs.
- Install the Guardrail along the deck.
- Run the Inspection so the engineer walks across the finished bridge.
Common Mistakes to Avoid
- Laying the deck before the arch beam
- Skipping the waterproof coating
- Forgetting the second No Entry sign
- Ending before the Inspection walk
Quick Tips for Brain Puzzle: Tricky Quest Level 123 (spoiler-free)
- Drill before placing pillars
- Follow real construction order
- Save Inspection for last
Board notes 5 details
- Layout
- A dog engineer in a yellow hard hat stands on the left of two cliffs over water, holding a blueprint; a scrollable toolbar supplies Bridge Formwork, Cement, Guardrail, Arch Beam, Stairs, Inspection, Pillar, Pier, Waterproof Coating, and a No Entry sign.
- Goal
- Build the complete bridge in construction order and run the final Inspection so the engineer crosses.
- Opening
- Drill foundation holes into both cliff tops, then place a Pillar in each hole.
- Danger Zone
- Deck and cement do nothing before the pillars and arch beam exist; the level stays unfinished until the guardrail, both No Entry signs, and the Inspection are done.
- Mechanics
- Each toolbar part is consumed onto the bridge in a fixed structural sequence; the Inspection item is the completion check.
Frequently Asked Questions
What goes first?
Drill the foundation holes on both cliffs, then place the pillars into them.
Why won't the bridge complete?
Every toolbar part must be consumed, including the guardrail and both No Entry signs, before the Inspection.
What is the Inspection item for?
It is the final check — the engineer walks across the finished bridge and the level completes.