Car Sort level guide
Car Sort Level 70 Walkthrough
Car Sort Level 70 is an elevator tower where the hanging top trio and stacked middle shelves must clear the shaft before the lower green-pink finish pair can lock in.
Board Notes
- Layout
- Three hanging columns feed four stacked middle shelves through a straight vertical shaft, with two finish columns waiting below.
- Goal
- Separate the hangers first, flatten the middle shelves in order second, and finish the lower pair last.
- Opening
- Pull the yellow hanger away from the blue-purple pair and leave the lower finish row parked while the shaft is busy.
- Danger Zone
- If the lower green or pink columns begin to close while the middle shelves still use the shaft, the final transfers block immediately.
- Mechanics
- Every important move runs through the same shaft. The middle shelves decide when that route can finally belong to the finish row.
Quick Tips for Car Sort Level 70 (spoiler-free)
- Clear the hangers before trusting the lower finish.
- Flatten the middle shelves from top to bottom.
- Do not give the shaft to the bottom pair too early.
How to Solve Car Sort Level 70 — Full Solution
- Separate the hanging columns until the shaft stops feeding several middle shelves together.
- Flatten the upper middle shelf and then the shelves below it in sequence instead of jumping to the bottom row.
- Keep the lower green and pink finishes parked while the shaft still belongs to the stacked middle cleanup.
- Hand the route to the lower row only after the middle shelves have already reduced to stable color bands.
- Finish the bottom pair last once the upper hangers no longer need the elevator shaft.
Colors in this level:
Yellow, Blue, Purple, Orange, Red, Green, Pink
Common Mistakes to Avoid
- Letting the lower pair use the shaft while the middle shelves are still stacked out of order.
- Ignoring the top-to-bottom sequence and reversing cleaned shelves later.
Frequently Asked Questions
What should settle first in Car Sort Level 70?
The hanging columns and the stacked middle shelves should calm first so the shaft becomes safe for the finish pair.
Why does Level 70 keep blocking near the end?
Because the lower pair often starts too early and steals the same shaft the middle shelves still need.