Loop Sort level guide
Loop Sort Level 229 Walkthrough
Loop Sort Level 229 is a SUPER HARD clockwise horizontal lock loop with five upper sources, three open lower trucks, and a lower-left shutter. Start with U5 yellow-to-red, then route D3 brown/yellow, D1 yellow/cyan, D2 orange/green, the upper reveals, and the final U1 green plus D1 cyan pass.
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Loop Sort Level 229 — Full Solution
- Once the complete board is visible, tap U5's bottom yellow band at the upper-right; let the revealed red band use the right-side entry and wait for its check.
- Tap D3, the rightmost open lower truck, as brown and then yellow become visible; keep the lower-left locked shutter untouched.
- Tap D1's yellow and cyan layers, then D2's orange and green layers, leaving the shared bottom return clear for the longer waves.
- Tap U2's key-marked yellow source and follow its revealed brown band. Re-read U4's cyan/gray stack and U1/U3's pink/green covers after the first upper checks.
- Continue the visible order through U1 pink, U3 pink, U4 cyan/gray, D1 red/green/cyan, and the later U2/D2/D3 checks; never treat the lock panel as cargo.
- In the final pass, release U1's late green band, then let D1's remaining cyan band enter the lower return. Confirm U1-U5 and D1-D3 checks and use the logo fade as completion.
Colors in this level:
Pink, Yellow, Orange, Red, Green, Cyan, Blue, Brown, Gray
Common Mistakes to Avoid
- Tapping D1 cyan or red while the U5 red wave is still filling the right rail.
- Opening or counting the lower-left lock shutter as if it were an open receiver.
- Assuming U2/U4/U5 covered cargo remains the same after the prior band checks.
Quick Tips for Loop Sort Level 229 (quick clues)
- On the complete board, start with U5 bottom yellow and follow its red reveal.
- Keep D1's right-side cyan/red stack out of the turn while U5 red is circulating.
- The lock/key graphics identify visible state only; always read the newly exposed band.
Board notes 5 details
- Layout
- A clockwise horizontal rounded rectangle runs left-to-right on top, down the right, right-to-left on the bottom, and up the left. Five upright sources U1-U5 sit above. A large locked shutter sits below-left, followed by open upright trucks D1-D3. The opening stacks are U1 pink/covered/orange, U2 key-marked yellow/covered/red, U3 pink/covered/green, U4 cyan/covered/gray, U5 covered/cyan/yellow, D1 yellow/covered/cyan, D2 orange/covered/green, and D3 covered/brown.
- Goal
- Check U1-U5 and the three open lower D1-D3 positions; the lower-left shutter is a reserve graphic, not an open truck. The HUD shows six progress groups but is not a move count. The final U1 green and D1 cyan waves drain before the visible screens all check and the LOOP SORT logo appears.
- Opening
- After the short intro/partial-board view, tap U5 at the upper-right for its bottom yellow band; it reveals red. Then use D3 brown/yellow, D1 yellow/cyan, and D2 orange/green while leaving the lower-left shutter closed.
- Danger Zone
- The empty center does not remove the shared right and bottom turns. Do not tap D1 cyan/red while U5 red occupies the right rail, and do not use the locked lower-left shutter as a free receiver or infer hidden cargo from its purple body.
- Mechanics
- The visible SUPER HARD label, key-marked U2 band, and locked lower-left shutter are UI states. Covered cargo changes in place: U5 yellow becomes red, U2 later exposes brown, U4 changes through gray/cyan, and the late U1/D1 pair ends on green/cyan.
Frequently Asked Questions
Which truck is tapped first after the intro?
U5, the upper-right truck: its bottom yellow band is released first in the complete-board view and reveals red.
What are the last two visible colors?
The final pass shows U1's green band and D1's cyan band draining through the shared right/bottom return before all open screens check.