Tidy Puzzle level guide
Tidy Puzzle: Perfect Satisfy Level 53 Walkthrough & Exact Solution
Set the exact ports on an 18-cell honeycomb so the C4 triangular source feeds the five round terminals at A1, C1, E1, A2, and E2.
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Tidy Puzzle Level 53 — Full Solution
- Set the top group to C1: S, A1: NE, B1: SW-SE, E1: NW, and D1: SW-SE.
- Rotate the center hub C2 until its five ports are N-NW-NE-SW-SE; the missing sixth port faces south toward C3.
- Set the left inward connector B2 to S-NE, then set the right inward connector D2 to S-NW.
- Set the source splitter C3 to S-NW-NE and leave the triangular source C4 pointing N.
- Build the left return with A2: S, A3: N-SE, B4: N-NW, and B3: N-S-NE.
- Build the right return with E2: S, E3: N-SW, D4: N-NE, and D3: N-S-NW.
- Confirm the yellow routes C4-C3-B3-B2-C2 and C4-C3-D3-D2-C2, then check C2-C1, C2-B1-A1, C2-D1-E1, B3-B4-A3-A2, and D3-D4-E3-E2.
- When all five round terminals glow at the same time, stop rotating cells and wait for `YOU GOT IT!!!`.
Colors in this level:
Orange, Yellow, Brown
Common Mistakes to Avoid
- Do not give C2 a south arm; its correct five ports are N-NW-NE-SW-SE.
- Do not turn C3 into an elbow; the source splitter must keep all three ports S-NW-NE.
- Do not copy one side's compass directions onto the other: B2 uses NE while D2 uses NW, and the return elbows mirror the same way.
Quick Tips for Tidy Puzzle Level 53 (quick clues)
- Use the A-E coordinate map instead of choosing hexagons by color.
- Stop a tile when its printed line touches exactly the listed edge ports.
- If a terminal stays brown, trace its named chain backward to the first mismatched pair.
Board notes 5 details
- Layout
- Address the five staggered columns from left to right as A-E. From top to bottom the bands are C1; B1-D1; A1-C2-E1; B2-D2; A2-C3-E2; B3-D3; A3-C4-E3; and B4-D4. A1, C1, E1, A2, and E2 are round terminals, while C4 is the triangular source.
- Goal
- Connect C4 through the C3 splitter and C2 hub to all five round terminals so the entire track network glows yellow and `YOU GOT IT!!!` appears.
- Opening
- Set C1 to S, A1 to NE, B1 to SW-SE, E1 to NW, and D1 to SW-SE. Then rotate C2 to N-NW-NE-SW-SE, with no south arm.
- Danger Zone
- C2 and C3 are different junctions: C2 is a five-way hub with no S port, while C3 is a three-way source splitter with S-NW-NE. Swapping those shapes leaves part of the board dark.
- Mechanics
- Each tap rotates one hexagon's printed track. Use N, NE, SE, S, SW, and NW for the six edge ports; connected segments turn yellow when they share opposite ports along an unbroken route to C4.
Frequently Asked Questions
How are the hexagons identified in Level 53?
Use columns A-E from left to right and the staggered coordinate bands listed in the layout note; C4 is the bottom source, C3 is the lower splitter, and C2 is the upper hub.
What is the difference between C2 and C3?
C2 has ports N-NW-NE-SW-SE and no S port. C3 has only S-NW-NE, joining the source to the left and right feeds.
Which complete chains should glow?
Check C4-C3-B3-B2-C2, C4-C3-D3-D2-C2, C2-C1, C2-B1-A1, C2-D1-E1, B3-B4-A3-A2, and D3-D4-E3-E2.