Yarn Fever level guide
Yarn Fever Level 20 Walkthrough
Yarn Fever Level 20 is easiest when you break the wide teal slabs and long rails before touching the tiny tool scraps. Once the table-like structure comes apart, the red wedges, pink pads, and small workshop pieces stop getting trapped in the same frame.
Board Notes
- Layout
- The board is a workshop or tool-table pile with broad teal panels, blue rails, white ladder-like strips, orange and red wedges, pink pads, green blocks, and a few long thin rods crossing the stack.
- Goal
- Dismantle the oversized panels and rails before cleaning the smaller workshop pieces. The table-like structure is what keeps the board cramped.
- Opening
- Start with the orange forked strand and the first wide teal panel, then peel one long blue or white rail crossing the pile.
- Danger Zone
- The red wedges, pink pads, and little gray tool bits appear easy from the start, but they are still boxed in while the wide teal slabs and ladder rails span the center.
- Mechanics
- This is a flatter, workshop-style junk pile. The route is driven by large rectangular supports and long rails rather than one obvious central object.
Quick Tips for Yarn Fever Level 20 (spoiler-free)
- As long as a full-width teal slab or long white rail is still visible, keep attacking structure instead of scraps.
- With 8 colors in play, clear the pair with the fewest blockers first so the board opens up instead of tightening.
- Think in chain clears. The best move is the one that sets up the next two moves, not just the quickest current match.
How to Solve Yarn Fever Level 20 — Full Solution
- Pull the orange forked strand and the first wide teal panel so the upper workshop layer begins to separate.
- Remove one long blue or white rail that crosses the center before spending time on the small wedges or pads.
- Break the remaining broad teal slabs and large red structural pieces while they still box in the middle of the board.
- Peel the white ladder-like strips and orange rails after the main table surface has started to collapse.
- Clear the pink pads, red wedges, green blocks, and small gray tool scraps once the large supports are gone.
- Finish with the last thin rods and tiny colored fragments left near the lower edge of the board.
Colors in this level:
Teal, Blue, White, Orange, Red, Pink, Green, Gray
Common Mistakes to Avoid
- Spending early moves on small workshop scraps while the wide slabs and long rails still hold the table structure together.
Frequently Asked Questions
What should I clear first in Yarn Fever Level 20?
Break the wide teal slabs and long rails first. The smaller wedges, pads, and tool bits become much easier after the main structure is gone.