Jelly Busters level guide
Jelly Busters Level 31 Walkthrough
Jelly Busters Level 31 clears a purple-and-cyan cube with a yellow roof by opening purple first, cycling cyan around the loop, and saving black and yellow single-digit returns for the scattered end pixels.
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Jelly Busters Level 31 — Full Solution
- Send the staged purple 10 from the bottom entry, then keep the following purple pieces moving along the bottom and right rail through their visible 29 and 9 states to remove the rim and inset faces.
- Launch cyan 40 and cyan 30 after the purple opening. Follow their lower-right, right, top, and left passes; the 39 and 22 returns continue clearing the cube's cyan side panels.
- Use the black 30/40 queue entries for the underside and shadow pixels, and re-enter the same black Jelly when it returns with 3 or 2 at the bottom/right rail.
- Bring yellow 10 to the top rail for the roof, then reuse its low-count return at the bottom/right side for the remaining yellow corners.
- Release the cyan 1, purple 2/3, and black 3/2 pieces from buffer slot 1 in rail order so the thin cyan strip, purple arms, and black gaps are removed without adding a new buffer burden.
- Use the last yellow single-digit pass for the remaining yellow flecks, then follow the final purple and black hits until the central field is empty.
- Confirm the ASTONISHING! reward screen before moving on.
Colors in this level:
Purple, Cyan, Black, Yellow
Common Mistakes to Avoid
- Opening another long-count Jelly while cyan 1 or black 3 is still parked and able to reach a matching cube pixel.
- Stopping when the large cube body is gone and leaving the separated purple arms or yellow/black specks for a later, already-blocked buffer state.
Quick Tips for Jelly Busters Level 31 (spoiler-free)
- Open the purple rim before committing the long cyan entries; the side panels are the first broad cyan target.
- Track a low-count Jelly by its rail side: black 3/2 and purple 2/3 are still useful after the cube silhouette has broken apart.
- Leave a buffer slot for the returning yellow and cyan pieces instead of stacking a new 40-hit color too early.
Board notes 5 details
- Layout
- The central pixel picture is a cube with a yellow top, cyan front and side panels, purple outer and inset faces, and black shadow pixels below. The dark loop rail starts at 4/5; five orange buffer slots are empty, a purple 10 is staged at the bottom entry, and the readable queue begins black 30, cyan 40, and cyan 30.
- Goal
- Strip the purple rim and insets, the cyan side panels, the yellow roof, and the black underside. The final target is the separated purple arms plus the last yellow and black pixels, followed by the empty-board ASTONISHING! card.
- Opening
- Use the staged purple 10 first, then follow the purple 29/9 states on the bottom rail. Send cyan 40 and 30 next through the lower-right and right rail, where the visible cyan returns include 39 and 22; black reaches the bottom at 3 before yellow 10 takes the roof.
- Danger Zone
- Keep cyan 1, black 3/2, purple 2/3, and yellow 1/0 available when the counter is moving between 0/5 and 3/5. Filling buffer slot 1 with a fresh Jelly before those returns are reused leaves the cube's isolated pixels unreachable.
- Mechanics
- This board is layered rather than a single color field. Purple, cyan, black, and yellow Jellies alternate between bottom entry, right/top/left rail positions, and buffer slot 1; each low displayed number is a remaining-hit state that must be reused for the matching picture layer.
Frequently Asked Questions
What should I launch first in Jelly Busters Level 31?
Use the purple 10 already staged at the bottom entry, then follow the next purple return before committing the cyan 40/30 route.
Why keep black 3 or purple 2 in the buffer?
Those are remaining-hit Jellies, not spent moves. Their short return passes reach the underside, purple arms, and other isolated cube pixels that remain after the broad color layers clear.
How do I know Level 31 is finished?
The cube pixels disappear completely, the loop field is empty, and the video shows the ASTONISHING! reward screen.