Sand Blocks level guide
Sand Blocks: Drop Puzzle Level 26 Walkthrough
Level 26 puts a blue layer over red above a raised shelf. Sweep the red 3x2 receiver from center to left and right, then move the blue 3x2 receiver from the left stream toward center.
Open on YouTube
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Sand Blocks Level 26 — Full Solution
- Drag the red 3x2 receiver from lower center straight up beneath the central outlet.
- Hold it under the first red fall until the meter reaches roughly 77%.
- Drag the same red receiver left to catch the tail sliding around the shelf's left corner.
- Drag it across to the right drop and hold through 97% and 99% until it reaches 100% and vanishes.
- Wait for the unsupported blue layer to collapse into a mound above the shelf.
- Drag the blue 3x2 receiver from lower left up against the far-left blue fall line.
- Hold it there while the first stream raises the meter through roughly 31% and 35%.
- Drag the blue receiver toward the central fall line as the mound flattens.
- Keep it under the last blue slope until it reaches 100%, vanishes, and the reservoir is empty.
Colors in this level:
Red, Blue
Common Mistakes to Avoid
- Moving blue before the red receiver has disappeared.
- Leaving either wide receiver stationary while a side tail settles outside its footprint.
Quick Tips for Sand Blocks Level 26 (quick clues)
- Clear red before touching blue.
- Move red center-left-right, then move blue left-to-center.
Board notes 5 details
- Layout
- A full-width blue layer sits over red above a three-cell raised shelf. Red and blue receivers each span about three columns by two rows; red starts lower center and blue lower left.
- Goal
- Clear the split red layer with the wide red footprint, then collect the blue mound created by that clear.
- Opening
- Lift the red 3x2 receiver to the central mouth, then sweep left and right as the two red tails settle.
- Danger Zone
- The receiver width does not cover both far shelf corners at once, so a stationary receiver leaves a side tail behind.
- Mechanics
- The red clear removes the lower support and creates a new blue mound; both phases require repositioning the active 3x2 footprint.
Frequently Asked Questions
How large are the receivers in Level 26?
Both red and blue receivers cover approximately three grid columns by two rows.
Why does the red receiver move twice?
The raised shelf leaves separate left and right red tails, so the 3x2 footprint must visit both drops.