Sand Blocks level guide
Sand Blocks: Drop Puzzle Level 6 Walkthrough
Level 6 stacks red, yellow, blue, and yellow sand above a four-column receiver grid. Empty the lowest yellow with the L and tall receiver, cycle four blue pieces, use three yellow squares, and save both red bars for last.
Open on YouTube
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Sand Blocks Level 6 — Full Solution
- Drag the yellow three-cell L to the top-left mouth footprint, covering top-row columns 1-2 and the cell below column 1; wait for 100%.
- Lift the yellow 1x2 vertical receiver into the top-right mouth and clear the rest of the lowest yellow layer.
- Place the blue 2x1 bar immediately under the exposed blue band and let it disappear.
- Move the first blue 1x1 square into an open mouth cell and wait for its 100% clear.
- Replace it with the second blue square on the remaining blue spill.
- Bring the blue 1x2 vertical receiver to the last blue pocket and empty the blue band.
- Feed the first yellow square into the newly exposed middle yellow layer.
- Cycle the second yellow square through the same mouth after the first vanishes.
- Use the third yellow square on the residual yellow grains until only red remains.
- Lay the first red 3x1 bar across three mouth cells and fill it to 100%.
- Slide the second red 3x1 bar into that span to catch the final red grains and trigger the empty-board finish.
Colors in this level:
Red, Yellow, Blue
Common Mistakes to Avoid
- Putting a red bar across the mouth during the blue phase.
- Moving a small yellow square before the large bottom-layer receivers have cleared.
- Dragging the next receiver while the current sand stream is still settling.
Quick Tips for Sand Blocks Level 6 (quick clues)
- Use the two large yellow shapes on the lowest yellow layer before touching a blue receiver.
- Wait for each 100% disappearance before staging another piece in the shared mouth.
- Keep both 3x1 red bars below the action until the reservoir shows red only.
Board notes 5 details
- Layout
- The full-width reservoir has four horizontal layers, top to bottom red/yellow/blue/yellow. The four-column lower grid holds a yellow three-cell L, one yellow 1x2, three yellow squares, a blue 2x1, two blue squares, one blue 1x2, and two red 3x1 bars, all at 0%.
- Goal
- Remove the sand from the bottom stratum upward so each receiver can use the shared top-row mouth and the board ends completely empty.
- Opening
- Snap the yellow L into top-row columns 1-2 with its leg below column 1, wait for its 100% clear, then put the yellow 1x2 at the right side of the mouth.
- Danger Zone
- A red 3x1 bar placed before the blue and middle-yellow phases consumes three of the four mouth cells and blocks the small receivers.
- Mechanics
- Receivers snap to the visible grid, act as walls while filling, and disappear at 100%; the reservoir must be processed in its real yellow-blue-yellow-red order.
Frequently Asked Questions
Which receiver goes first in Sand Blocks Level 6?
Use the yellow three-cell L at the top-left mouth, followed by the yellow 1x2 on the right.
When should I use the red bars?
Only after both yellow phases and the blue band are gone, when the reservoir contains red sand alone.
What is the exact color order?
Clear yellow, blue, yellow, then red, matching the reservoir from its bottom layer upward.