Sand Blocks level guide
Sand Blocks: Drop Puzzle Level 2 Walkthrough
Level 2 layers red, green, and blue sand above two L-shaped receivers and a four-cell green T. Rotate the partial blocks between the two spill edges, clear green first, then finish the tiny red and blue remnants.
If the player asks you to sign in, open the video on YouTube instead.
How to Solve Sand Blocks Level 2 — Full Solution
- Place the red L at R1C4/R1C5/R2C4, let the right red stream raise it to 72%, then park it at R5C1/R5C2/R6C1.
- Stage the blue L at R1C1/R1C2/R2C2, then place the green T at R1C3-5/R2C4 and collect green to 34%.
- Park green low-right; move blue to the upper-right spill, collect blue to 48%, and park the L on the left.
- Return red to the upper-left reservoir edge, raise 72% to 95%, and lower it again to reopen the top row.
- Move green to the upper-right spill for 56%, then slide its three-cell bar under the upper-left green mass and wait for 100% to clear the T.
- Raise blue to the upper-left spill, collect from 48% to 95%, and park it low-left.
- Place red beneath the remaining central red mound and hold it until 100% removes the red L.
- Bring blue back beneath the left blue grains to reach 98%, sweep through the middle catch position, and return under the last patch for the 100% clear.
Colors in this level:
Red, Green, Blue
Common Mistakes to Avoid
- Expecting any of the three receivers to finish from its first reservoir contact.
- Keeping the green T across the top after 34% and blocking the L-shaped return path.
- Stopping when blue shows 98% even though a small blue patch remains at the reservoir lip.
Quick Tips for Sand Blocks Level 2 (quick clues)
- Keep one upper spill edge free whenever you park a partially filled receiver.
- Clear the four-cell green T before trying to finish the two L shapes.
- After red disappears, blue still needs two short passes from 95% to 98% to 100%.
Board notes 5 details
- Layout
- A five-column by six-row receiver grid sits below one wide sloped reservoir. The red L starts on R3C1/R3C2/R4C1, the mirrored blue L on R4C4/R4C5/R5C5, and the green T on R5C2-4/R6C3; the reservoir shows red low, green through the middle, and blue across the upper and outer edge.
- Goal
- Take partial pours without blocking the opposite spill, remove the green T first, then use the freed top row to bring red and blue from their 95% states to 100%.
- Opening
- Move the red L to R1C4/R1C5/R2C4 for a 72% right-side pour, park it low-left, stage blue upper-left, and raise the green T to R1C3-5/R2C4 for its first 34%.
- Danger Zone
- Leaving the wide green T across R1C3-5 after 34% closes the upper corridor; it must be parked before blue and red can return to the reservoir edge.
- Mechanics
- The irregular footprints retain partial sand while moved. The observed progression is red 72-95-100, green 34-56-100, and blue 48-95-98-100.
Frequently Asked Questions
Which receiver clears first in Sand Blocks Level 2?
The green T clears first after its 34%, 56%, and final upper-left fill phases.
Why do I move the red L more than once?
The red sand is exposed in separate pours, so red reaches 72%, then 95%, and only the last central mound brings it to 100%.
How is the last blue sand collected?
After red clears, move the 95% blue L under the left remnant for 98%, sweep it through the center, and catch the final patch at the top edge.